manualshive.com logo in svg

Panasonic LB-DH8 series, Operator'S Manual

Share
Download
Panasonic LB-DH8 series Operator'S Manual Download Page 39

39

Operations

Operating the control panel

Changer <Monitor>

Indicates information concerning the changer unit of the unit.

Status

Indicates the status of the changer unit in the unit.

Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.

Add Info

Indicates additional information of “Status” (only when “Status” is set to “Ready”).

Scanning: Inventory is being executed.
Transport: A magazine is being moved.

Drawer

Indicates the unlock permission status of the magazine drawer.

prevented by host: Unlocking the magazine drawer is disabled by the 
application.
Open: There is an open magazine drawer.

≥

A blank state indicates that the magazine drawer can be unlocked.

Power On Time

Indicates the time of power supply to the changer unit.

Move Count

Indicates the number of times of the magazine move operation.

Summary of Contents for LB-DH8 series





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands