20
Introduction
Handling a magazine and magazine drawer
Removing a magazine from a magazine drawer
1
Unlock the magazine drawer.
≥
The unit locks a magazine drawer to prevent it from being opened by mistake.
To remove a magazine, unlock the magazine drawer through the Web interface as follows.
`
Web interface: “Manage”
@
“Open Drawer” (
≥
When unlocking the magazine drawer has been disabled by an application, refer to the application manual,
give permission to unlock the magazine drawer, and unlock the magazine drawer.
≥
Be sure to push the unlocked magazine drawer all the way in to securely lock it into position. After that,
inventory is executed to acquire the magazine information and the changer unit operates.
≥
The magazine drawer cannot be unlocked manually.
2
Draw the magazine drawer.
≥
Hold the handle of the magazine drawer and pull it you, and while supporting the bottom of the magazine
drawer one hand, pull it completely out.
≥
Depending on the system configuration or installation location, this step must be performed with both hands
at an elevated height. Ensure that the work area is safe and be careful not to stumble over objects or fall from
the area.
≥
The lower front part of the bottom magazine drawer on each side has a convex shape, so place the drawer
vertically, not horizontally.
Handle
Vertically placed
Horizontally placed
Convex part
