Panasonic KXF-293C Operating Instructions Manual Download Page 59

Page: 59 / 148

Page 3-7

CHANGING THE

PRODUCTION BOARDS

3-3

Setting the Support Pins

When the board size and thickness are changed or when parts are mounted on the back of board,
adjust the support pin.

. Move the support pin position de-

pending upon the board size.

• To support the whole board equally, set many

support pins as possible.

∗

Be careful not to make contact with the parts
on the back of board.

NOTICE

Carry out the automatic width adjustment of left and right board width conveyors
and board holder, before setting the support pins.

Supporter

M97E

TURN OFF THE POWER AND THE SERVO SWITCH BEFORE WORKING INSIDE
ACTIVE PART OF THE MACHINE FOR MACHINE SET-UP.

You will have serious injury if the machine is actuated.

WARNING

293C-E-EMA03-A01-01

07JEC5AA

Summary of Contents for KXF-293C





















































































































































Search results

Summary of Contents for KXF-293C

Reviews:

Brands by name

Popular brands

Panasonic KXF-293C, Operating Instructions Manual

Search results

Summary of Contents for KXF-293C

Reviews:

Brands by name

Popular brands