Panasonic KXF-293C Operating Instructions Manual Download Page 126

Page: 126 / 148

Page 7-4

293C-E-EMA07-A01-01

7-3

Heads

Such head movements as the head moving up and down or preparatory dispensing are checked.

1. Select

UNLOCK

and movement to run.

Step run

One sequence of X, Y, Z, and theta movements are carried out.

Head retract
The head is retracted to the left edge.

• Head up and down

1 sequence of X, Y, theta movements are carried out .

Shotting

Dispensing (only two axes ) is carried out.

The head moving up and down (only two axes) are carried out by one step.

• Preparatory dispensing

The head moves to the preparatory dispensing.

Priming shot
Preparatory dispensing (only Z axis) is carried out.

The head falling down and rising (only Z axis) are carried out by one step.

X Y

step operation

Head up / down

step operation

X Y

step operation

Head up / down

step operation

Summary of Contents for KXF-293C





















































































































































Search results

Summary of Contents for KXF-293C

Reviews:

Related manuals for KXF-293C

Brands by name

Popular brands

Panasonic KXF-293C, Operating Instructions Manual

Search results

Summary of Contents for KXF-293C

Reviews:

Related manuals for KXF-293C

Brands by name

Popular brands