Panasonic KXF-013C, Operating Instructions Manual

Page: 46 / 49

Chapter 2 OPERATION Section 6 CHANGING MACHINE SET UP
6
Page 6-1
Section 6 CHANGING MACHINE SET UP
013C-E-OMA06-A01-00
6-1 Process of Change
6-1-1 Adjustment of Magazine Width
6-1-2 Adjustment of Conveyor Width
Adjust the conveyor width by loosening the lock lever and adjusting the adjusting handle.
Set the conveyor width as board
width+ 0.5.
(Set the board width considering the
dispersion of boards.)
Move a board through the conveyor
to make sure that the board can
move through the conveyor
smoothly and then fix the lock lever.
motor
fixed rail
motor
014C-PS014
board
conveyor width
movable rail
adjusting handle
moving direction
lock lever
X direction
screw
4
Y direction
guide
movable plate
bolt
1
screw
2
screw
3
Adjustment of magazine width
Loosen the screw 1 2 ,and 3 to
move the plate at movable side and
then, adjust the magazine width
inYdirection.
Loosen the screw 4 (2 pieces) to
move the guide and then, adjust
the magazine width in X direction.
The space between the board and
the guide is about 0.5mm.
013C-PS006
Refer to 5-1-2 How to Supply Materials (Boards). It discusses the way of pulling out the
magazine this side.