7 After Installation
7.1 Confirming the
Settings and Connection
You can perform the following checks before making a
video conference call:
–
Network test to check your network connection
–
Self diagnosis to check image and sound
You can also confirm the connection by making a video
conference call to the Panasonic HD Visual
Communication test site.
Follow the steps below to check the settings and
connection:
Performing a Network Test
You can confirm whether a network connection can be
established with a particular IP address.
Note
•
You cannot perform a network test from the
contact list screen or the call history screen.
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
three times.
•
The fourth page is displayed.
4.
Use
[
][
]
to select
"Network Test"
and press
[Enter]
.
•
The network test screen is displayed.
5.
Enter an IP address.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
6.
Press
[R]
.
•
The network test starts. After the network test is
finished, if the network test was successful or
timed out, the details of the results are
displayed. If the network test failed, a message
indicating the failure is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Performing Self Diagnosis
You can check how your image will be displayed and
how your voice will be heard to the other party before
starting a video conference call, using your own display
and speakers.
Note
•
Self diagnosis can be performed even when a
headset is connected.
Installation Manual
45
7 After Installation
Summary of Contents for KX-VC300CN
Page 63: ...Installation Manual 63 Notes ...
