background image

5.

Use 

[

][

]

 to select 

"Import data"

 and press

[Enter]

.

The data import screen is displayed.

6.

Use 

[

][

]

 to select the following items for input:

"USB Directory"

: Specify the directory that

contains the data, from 

"root"

, or "/01"–"/16".

"Data"

: Specify the data that will be imported, from

"All Data"

"Contact List"

"Local site Data"

, or

"Configuration Data"

.

7.

Press 

[G]

.

A dialogue box is displayed asking you to
confirm the import and that unit will restart after
the import.

8.

Use 

[

][

]

 to select 

"Yes"

 and press 

[Enter]

.

The unit restarts so that the imported data can
be applied.

Activating Enhanced Features

You can activate features by enhancing the unit’s
software. To activate the feature, you must obtain a
registration key from your dealer. First, provide your
dealer with the Activation Key No. and Registration ID
written on the activation key card, and the unit’s MPR
ID. The dealer will enter this information into the Key
Management System and then issue you with the
registration key.

To Confirm the MPR ID
1.

Log in to the administrator menu (Page 112).

The administrator menu screen is displayed.

2.

When using IP mode:
Press 

[

]

 three times.

The fourth page is displayed.

When using NAT Traversal mode:
Press 

[

]

 twice.

The third page is displayed.

3.

Use 

[

][

]

 to select 

"Enhancement"

 and press

[Enter]

.

The software enhancement screen is
displayed. Check the field 

"MPR ID"

 (

A

).

A

To Register the Registration Key

Registering the registration key you acquired activates
the enhanced features.

1.

Log in to the administrator menu (Page 112).

The administrator menu screen is displayed.

2.

When using IP mode:
Press 

[

]

 three times.

The fourth page is displayed.

When using NAT Traversal mode:
Press 

[

]

 twice.

The third page is displayed.

Document Version  2013-09  

User Manual

127

Contacts and Settings

Summary of Contents for KX-VC300













































































































































































Reviews: