manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 90 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 90

Default Value

Not applicable.

DNS1

Description

Indicates the specified IP address of the primary DNS server (reference
only).

Note

•

If the primary DNS server address is not specified, this field will
be left blank.

Value Range

IP address of the primary DNS1 server

Default Value

Not applicable.

DNS2

Description

Indicates the specified IP address of the secondary DNS server 
(reference only).

Note

•

If the secondary DNS server address is not specified, this field
will be left blank.

Value Range

IP address of the secondary DNS2 server

Default Value

Not applicable.

IPv6 Connection Mode

Description

Indicates the IPv6 connection mode (reference only).

Value Range

•

DHCPv6

•

Static

•

Auto Configuration

•

Privacy

Default Value

Not applicable.

IPv6 Address

Description

Indicates the IPv6 address currently assigned to the unit (reference
only).

Value Range

IPv6 address

Default Value

Not applicable.

90

Administrator Guide

Document Version  2015-01  

4.2.2 Network Status

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments