manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 327 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 327

Description

Specifies whether to send the SUBSCRIBE request to a voice mail
server.

Note

•

Your phone system must support voice mail.

Value Range

•

Y/Yes

 (Send the SUBSCRIBE request)

•

N/No

 (Do not send the SUBSCRIBE request)

Default Value

N

Web User Interface Reference

Send SUBSCRIBE to Voice Mail Server (Page 143)

CONFERENCE_SERVER_URI

Value Format

String

Description

Specifies the URI for a conference server, which consists of "sip:", a
user part, the "@" symbol, and a host part, for example,
"sip:[email protected]".

Note

•

In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part 
("example.com" in the example above) can contain up to 127
characters.

•

Availability depends on your phone system.

Value Range

Max. 195 characters

Default Value

Empty string

Web User Interface Reference

Conference Server URI (Page 145)

DISPLAY_NAME

Value Format

String

Description

Specifies the name to display as the caller on the other party’s phone
when you make a call.

Value Range

Max. 24 characters

Note

•

You can use Unicode characters for this setting.

Default Value

Empty string

Web User Interface Reference

Display Name (Page 143)

VM_NUMBER

Value Format

String

Document Version  2015-01  

Administrator Guide

327

5.9.2 Per Line - Call Control Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments