manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 114 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 114

4.4.2.1  Administrator Password

Current Password

Description

Specifies the current password to use to authenticate the Administrator
account when logging in to the Web user interface.

Value Range

6–16 characters (except ", &, ', :, <, >, and space)

Default Value

Not stored.

Configuration File Reference

ADMIN_PASS (Page 245)

New Password

Description

Specifies the new password to use to authenticate the Administrator
account when logging in to the Web user interface.

Value Range

6–16 characters (except ", &, ', :, <, >, and space)

Default Value

Not stored.

Configuration File Reference

ADMIN_PASS (Page 245)

Confirm New Password

Description

Specifies the same password that you entered in 

[New Password]

 for

confirmation.

Value Range

6–16 characters (except ", &, ', :, <, >, and space)

Note

•

This value must be the same as the value entered in 

[New

Password]

.

Default Value

Not stored.

Configuration File Reference

ADMIN_PASS (Page 245)

4.4.3  User Password

This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.

114

Administrator Guide

Document Version  2015-01  

4.4.3 User Password

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments