manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 113 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 113

4.4  System

This section provides detailed descriptions about all the settings classified under the 

[System]

 tab.

4.4.1  Web Language

This screen allows you to select the language used for the Web user interface.

4.4.1.1  Web Language

Language

Description

Selects the language used for the Web user interface.

Value Range

English (US)

Default Value

English (US)

4.4.2  Administrator Password

This screen allows you to change the password used to authenticate the Administrator account when logging
in to the Web user interface.

Note

•

For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.

Document Version  2015-01  

Administrator Guide

113

4.4.2 Administrator Password

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments