ECO Mode
Setting
Description
Value Range
Default
ECO Mode
Enabling this mode reduces the
amount of electricity consumed by
the unit.
On, Off
Off
Note
•
When ECO mode is enabled, the Speed/Duplex setting (Page 52) for LAN Port and PC Port changes
as follows:
–
Speed/Duplex: "10M-Full"
–
PC port cannot be used.
•
When the ECO mode setting is changed, the unit will restart.
•
When ECO mode is enabled,
is displayed in the status bar at the top of the screen.
Screen Saver
Setting
Description
Value Range
Default
Wait Time (0-10min)
Period of idle time (in minutes) before
the screen saver is displayed.
0-10
0
Basic Call Features
FWD/DND Settings
If multiple lines are available at your unit, press
[ ]
or
[ ]
to select the line to apply the settings to when you
select "FWD/DND Settings" and "Block Anonymous Call".
Setting
Sub-Setting
Description
Value
Range
Default
FWD/DND Settings
Do Not Disturb
Enable DND (Do Not Disturb) to
reject all incoming calls.
On, Off
Off
Enable FWD All
Enable or disable forwarding of
all incoming calls to a specified
destination.
On, Off
Off
FWD All Number
Specify the number to forward
calls to when "Enable FWD
All" is enabled.
1-32 digits
—
Enable FWD Busy
Enable or disable forwarding of
incoming calls to a specified
destination when you are on a
call.
On, Off
Off
FWD Busy Number
Specify the number to forward
calls to when "Enable FWD
Busy" is enabled.
1-32 digits
—
Document Version 2014-11
Operating Instructions
47
Customizing the Telephone
