Description
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Value Range
Max. 1024 characters
Default Value
Empty string
CFG_ROOT_CERTIFICATE_PATH3
Value Format
String
Description
Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
Value Range
Max. 1024 characters
Default Value
Empty string
5.4 Network Settings
5.4.1 IP Settings
IP_ADDR_MODE
Value Format
Integer
Description
Specifies the IP address mode.
Value Range
0-2
–
0: IPv4
–
1: IPv6
–
2: dual
Document Version 2014-04
Administrator Guide
219
5.4.1 IP Settings
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...
