Panasonic KX-UT670, Administrator'S Manual, Page: 73 / 250

Value Range Max. 15 characters
Default Value Not stored.
Phone User Interface
Reference Network Settings (Page 16)
4.4.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, the LLDP settings and the VLAN
settings.
Note
•
When you change the settings on this screen and click [Save] , the message "Complete" is displayed,
and then the unit will restart automatically even if the unit is on a call.
•
Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings or perform IP
Reset through phone user interface programming. For details, refer to the Operating Instructions on
the Panasonic Web site (
®
see Introduction ).
4.4.2.1 Link Speed/Duplex Mode
LAN Port
Description Selects the connection mode (link speed and duplex mode) of the LAN
port.
Document Version 2012-07 Administrator Guide 73
Section 4 Web User Interface Programming