Panasonic KX-UT670, Administrator'S Manual

Page: 106 / 250

Default Value No
Configuration File Reference VM_SUBSCRIBE_ENABLE (Page 159)
Conference Server URI
Description Specifies the URI for a conference server, which consists of "sip:", a
user part, the "@" symbol, and a host part, for example,
"sip:conference@example.com".
Note
•
In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part
("example.com" in the example above) can contain up to 127
characters.
•
Availability depends on your phone system.
Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Default Value Not stored.
Configuration File Reference CONFERENCE_SERVER_URI (Page 160)
Inter-digit Timeout
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 1–15
Default Value 5
Configuration File Reference INTDIGIT_TIM (Page 160)
Timer for Dial Plan
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15
Default Value 5
Configuration File Reference MACRODIGIT_TIM (Page 160)
International Call Prefix
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters
106 Administrator Guide Document Version 2012-07
Section 4 Web User Interface Programming