Panasonic KX-UT248-B, Administration Manual, Page: 236 / 306

RTCP_SEND_BY_SDP_n
Parameter Name Example
RTCP_SEND_BY_SDP_1
,
RTCP_SEND_BY_SDP_2
, …,
RTCP_SEND_BY_SDP_6
Value Format Integer
Description Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
Value Range 0–1
–
0: Send RTCP signals using the value specified in
"
RTCP_INTVL_n
", if the "
RTCP_ENABLE_n
" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
Default Value 0
RTP_CLOSE_ENABLE_n
Parameter Name Example
RTP_CLOSE_ENABLE_1
,
RTP_CLOSE_ENABLE_2
, …,
RTP_CLOSE_ENABLE_6
Value Format Boolean
Description Specifies whether to enable processing to close held RTP sockets.
Value Range •
Y
(Enable RTP Close)
•
N
(Disable RTP Close)
Default Value Y
5.6.3 Miscellaneous VoIP Settings
OUTBANDDTMF_n
Parameter Name Example
OUTBANDDTMF_1
,
OUTBANDDTMF_2
, …,
OUTBANDDTMF_6
Value Format Boolean
Description Specifies the method for transmitting DTMF tones.
Value Range •
Y
(Outband [use telephone-event])
•
N
(Inband)
Note
•
If set to "
Y
", DTMF tones will be sent through SDP, compliant
with RFC 2833.
•
If set to "
N
", DTMF tones will be encoded in the RTP stream.
Default Value Y
Web User Interface Reference DTMF Type (Page 118)
236 Administrator Guide Document Version 2012-06
5.6.3 Miscellaneous VoIP Settings