Panasonic KX-UT248-B, Administration Manual, Page: 233 / 306

RTCP_INTVL_n
Parameter Name Example
RTCP_INTVL_1
,
RTCP_INTVL_2
, …,
RTCP_INTVL_6
Value Format Integer
Description Specifies the interval, in seconds, between RTCP packets.
Value Range 5–65535
Default Value 5
Web User Interface Reference RTCP Interval (Page 117)
MAX_DELAY_n
Parameter Name Example
MAX_DELAY_1
,
MAX_DELAY_2
, …,
MAX_DELAY_6
Value Format Integer
Description Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range 3–50 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than "
NOM_DELAY
"
–
This value must be greater than "
MIN_DELAY
"
–
"
NOM_DELAY
" must be greater than or equal to
"
MIN_DELAY
"
Default Value 20
Web User Interface Reference Maximum Delay (Page 117)
MIN_DELAY_n
Parameter Name Example
MIN_DELAY_1
,
MIN_DELAY_2
, …,
MIN_DELAY_6
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "
NOM_DELAY
"
–
This value must be less than "
MAX_DELAY
"
–
"
MAX_DELAY
" must be greater than "
NOM_DELAY
"
Default Value 2
Web User Interface Reference Minimum Delay (Page 117)
Document Version 2012-06 Administrator Guide 233
5.6.2 RTP Settings