Panasonic KX-UT248-B, Administration Manual, Page: 219 / 306

BELL_CORE_PATTERN4_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 4, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value 300,200,1000,200,300,4000
BELL_CORE_PATTERN5_TIMING
Value Format Integer
Description Specifies the cadence, in milliseconds, of pattern ID 5, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value 500
5.5.3 Telephone Settings
DISPLAY_NAME_REPLACE
Value Format Boolean
Description Specifies whether the name saved in the phonebook is used in place
of the name display if a matching entry is found.
Value Range •
Y
(Enable Display Name Replace)
•
N
(Disable Display Name Replace)
Default Value Y
NUMBER_MATCHING_LOWER_DIGIT
Value Format Integer
Description Specifies the minimum number of digits with which to match a
phonebook entry with an incoming call's caller ID. To specify exact
matching of entire numbers only, specify "0".
Document Version 2012-06 Administrator Guide 219
5.5.3 Telephone Settings