Panasonic KX-UT248-B, Administration Manual

Page: 217 / 306

Value Range 0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value 120,120,120,120,120,14400
HOLD_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 425
HOLD_TONE_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of the hold tone.
Value Range -24–6
Default Value 0
HOLD_TONE_RPT
Value Format Integer
Description Specifies whether the hold tone is repeated.
Value Range 0–1
–
0: No Repeat
–
1: Repeat
Default Value 1
HOLD_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
•
It is recommended that you set a value of 500 milliseconds or
more for the first value (off 1).
Document Version 2012-06 Administrator Guide 217
5.5.2 Tone Settings