Panasonic KX-UT248-B, Administration Manual

Page: 207 / 306

AUTO_CALL_HOLD
Value Format Boolean
Description Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
Value Range •
Y
(Enable Auto Call Hold)
•
N
(Disable Auto Call Hold)
Default Value N
REDIALKEY_CALLLOG_ENABLE
Value Format Boolean
Description Specifies whether the call log is displayed when the Redial button is
pressed while on-hook.
Value Range •
Y
(Displays outgoing call log by pressing the Redial button.)
•
N
(Not display call log by pressing the Redial button.)
Default Value N
ONHOOK_TRANSFER_ENABLE
Value Format Boolean
Description Specifies whether transfer operations are permitted while on-hook.
Value Range •
Y
(Enable On-hook Transfer)
•
N
(Disable On-hook Transfer)
Default Value Y
DISCONNECTION_MODE
Value Format Integer
Description Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
Value Range 1–2
–
1: Mode1 (ROT)
–
2: Mode2 (BT)
Default Value 1
TONE_LEN_DISCONNECT_HANDSET
Value Format Integer
Document Version 2012-06 Administrator Guide 207
5.5.1 Call Control Settings