background image

Introduction

Outline

This Administrator Guide provides detailed information on the configuration and management of this unit.

Audience

This Administrator Guide contains explanations about the installation, maintenance, and management of the
unit and is aimed at network administrators and phone system dealers.
Technical descriptions are included in this guide. Prior knowledge of networking and VoIP (Voice over Internet
Protocol) is required.

Related Documentation

Getting Started

Briefly describes basic information about the installation of the unit.

Operating Instructions

Describes information about the installation and operation of the unit.

Manuals and supporting information are provided on the Panasonic Web site at:

http://www.panasonic.com/sip

 (for users in the United States)

http://panasonic.net/pcc/support/sipphone

 (for users in all other countries/areas)

Technical Support

When technical support is required, contact your phone system dealer.

Open Source Software Notice

Parts of this product use open source software. For details about the open source software, see the Operating
Instructions.

Trademarks

Microsoft, Excel, Internet Explorer, Outlook, and Windows are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

All other trademarks identified herein are the property of their respective owners.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

NOTES

The screen shots shown in this guide are provided for reference only, and may differ from the screens
displayed on your PC.

2

Administrator Guide

Document Version    2012-06

Introduction

Summary of Contents for KX-UT248-B



















































































































































































































































































































Reviews: