Panasonic KX-UT248-B Page 151 Administration Manual Download

Page: 151 / 306

4.7.4.1 Management Server

Management Server URL

Description

Specifies the URL of the Auto-Configuration Server for using TR-069.

Note

•

This parameter must be in the form of a valid HTTP or HTTPS
URL, as defined in RFC 3986.

Value Range

Max. 256 characters

Default Value

Not stored.

Configuration File Reference

ACS_URL (Page 184)

4.7.4.2 Management Server Authentication

Authentication ID

Description

Specifies the user ID for the Auto-Configuration Server for using
TR-069.

Value Range

Max. 255 characters

Default Value

Not stored.

Configuration File Reference

ACS_USER_ID (Page 184)

Authentication Password

Description

Specifies the user password for the Auto-Configuration Server for using
TR-069.

Value Range

Max. 255 characters

Default Value

Not stored.

Configuration File Reference

ACS_PASS (Page 185)

4.7.5 Reset to Defaults

This screen allows you to reset the settings made through the Web user interface to their default values by
clicking

[Reset Web Settings]

. After you click this button, a dialog box is displayed, asking whether you want

to reset the settings. Click

to reset, or

Cancel

not to. For details about the reset, see

1.2.1.3 Resetting

the Settings Made through the Web User Interface (Reset Web Settings)

Notice

•

After resetting the settings, the unit will restart even if it is being accessed through the phone user
interface, or on calls.

Document Version 2012-06

Administrator Guide

151

4.7.5 Reset to Defaults

Summary of Contents for KX-UT248-B



















































































































































































































































































































Search results

Summary of Contents for KX-UT248-B

Reviews:

Related manuals for KX-UT248-B

Brands by name

Popular brands

Panasonic KX-UT248-B, Administration Manual

Search results

Summary of Contents for KX-UT248-B

Reviews:

Related manuals for KX-UT248-B

Brands by name

Popular brands