Panasonic KX-UT248-B, Administration Manual, Page: 124 / 306

Country Calling Code
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Not stored.
Configuration File Reference COUNTRY_CALLING_CODE (Page 204)
National Access Code
Description When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference NATIONAL_ACCESS_CODE (Page 204)
Default Line for Outgoing
Description Specifies the line used to make an outgoing call when no line is
specified in the dialing operation.
Note
•
The available line number may vary depending on the type of
the unit being used.
Value Range 1–2 (for KX-UT113/KX-UT123)
1–4 (for KX-UT133/KX-UT136)
1–6 (for KX-UT248)
Default Value 1
Configuration File Reference DEFAULT_LINE_SELECT (Page 204)
Flash/Recall Button
Description Selects the function of the FLASH/RECALL button during a
conversation.
Value Range •
Terminate
•
Flash Hook
Default Value Terminate
Configuration File Reference FLASH_RECALL_TERMINATE (Page 242)
124 Administrator Guide Document Version 2012-06
4.6.1 Call Control