Panasonic KX-UT248-B, Administration Manual, Page: 104 / 306

4.5.1.1 SIP Setting
SIP User Agent
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference SIP_USER_AGENT (Page 243)
4.5.2 SIP Settings [Line 1]–[Line x]
This screen allows you to change the SIP settings that are specific to each line. The number of lines available
varies depending on the phone being used, as follows:
•
KX-UT113/KX-UT123: 1–2
•
KX-UT133/KX-UT136: 1–4
•
KX-UT248: 1–6
Note
•
When registering multiple phone numbers on a KX-UT133/KX-UT136/KX-UT248, it is necessary to set
up DN buttons (flexible buttons). Otherwise, calls cannot be made.
104 Administrator Guide Document Version 2012-06
4.5.2 SIP Settings [Line 1]–[Line x]