Note
•
If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Deleting a stored phone number
1.
In stand-by mode, press
Setting
.
2.
Press
[ ]
or
[ ]
to select "
Call Block
", and then
press
[ENTER]
.
3.
Press
[ ]
or
[ ]
to select the phone number you
want to delete, and then press
Erase
.
4.
Press
[ ]
or
[ ]
to select "
Yes
", and then press
[ENTER]
.
Note
•
If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Holding a Call
You can put a call on hold by holding the call at your
extension.
To hold the current call
1.
Press
[HOLD]
, and then go on-hook.
Note
•
For KX-UT133/KX-UT136, if Automatic Call
Hold is enabled on your unit, the call will
also be put on hold if you press a DN button
(flexible button) other than the one for the
current call. For details, consult your
administrator or dealer.
To retrieve a call on hold at your extension
1.
Go off-hook.
2.
Do one of the following, depending on your unit:
For KX-UT113/KX-UT123 users
•
Press
[HOLD]
.
For KX-UT133/KX-UT136 users
•
Press the green flashing DN button (flexible
button).
Note
•
If a call is not retrieved within a specified time,
you will hear an alarm as a reminder (Hold
Recall).
•
For details about DN buttons, see "Flexible
Buttons (KX-UT133/KX-UT136 only)
(Page 34)".
28
Operating Instructions
Document Version 2011-09
Feature Operations
