Panasonic KX-UDT131, Operating Instructions Manual

Page: 27 / 66

Feature Operations
Making Calls
Calling
Calling by Dialling
1.
Press .
2.
Dial the outside party’s number.
3.
Press .
4.
To end the call, press .
Predialling
In standby mode, you can start dialling while still
on-hook. After dialling the number, press
to go
off-hook and begin the call.
Note
•
Alternatively, you can seize a specific line for
making the call by pressing
and selecting
an idle DN key.
•
To cancel dialling, press .
•
If " " flashes, move closer to the CS and dial
again.
•
If you are using a Bluetooth headset, see "Call
Handling with a Bluetooth Headset
(Page 34)".
Using the Outgoing Call Log
If a call is received from a phone number stored in the
phonebook, the number and name of the caller will be
displayed in the call log.
1.
While in standby mode, press [ ] or .
2.
Press [ ] or [ ] to select an outgoing call record,
and then press .
3.
To end the call, press .
Using the Incoming Call Log
1.
While in standby mode, press [ ] .
2.
Press [ ] or [ ] to select an incoming call record,
and then press .
3.
To end the call, press .
Using the Phonebook
1.
Press [ ] or .
2.
Select an item stored in the phonebook, and then
press
.
3.
To end the call, press .
Note
•
For details about searching for an item in the
phonebook, see "Searching for an Item in the
Phonebook (Page 28)".
•
For details about entering characters, see
"Entering Characters (Page 42)".
•
For details about storing an item in the
phonebook, see "Storing an Item in the Handset
Phonebook (Page 36)".
One-touch Dialling
You can make a call with a One-touch operation if a
One-touch Dialling key has been created for the desired
party. One-touch Dialling keys can also be configured
to access features of your phone system, if available.
1.
Press , and then press the One-touch Dialling
key (flexible key).
2.
To end the call, press .
Note
•
For details about Flexible Keys, see "Flexible
Keys (Page 22)".
Hot Key Dialling
You can assign a phone number to each number key
and then access the desired phone number by simply
pressing and holding the assigned number key.
1.
Press and hold the dialling key (0–9) assigned as a
Hot Key for more than 1 second.
2.
Press .
Note
•
While the Hot Key’s information is displayed,
you can press
[ ] or [ ] to select another Hot
Key number.
•
If Hot Key dialling is set to "
Auto
", a Hot Key
number can also be dialled by pressing and
holding the assigned dialling key for a specified
number of seconds. For details, see "Selecting
the Type of Hot Key Dialling (Page 40)".
Document Version 2012-11 Operating Instructions 27
Feature Operations