manualshive.com logo in svg

Panasonic KX-UDS124, Administrator'S Manual, Page: 87 / 292

Share
Download
Panasonic KX-UDS124 Administrator'S Manual Download Page 87

2.4.10.2  Survey List

Index

Description

Indicates the index of the SIP-CS that is registered to the Super Master
CS (reference only).

Value Range

1–128

Default Value

Not applicable.

CS Name

Description

Indicates the name of the SIP-CS that is registered to the Super Master
CS (reference only).

Value Range

Max. 20 characters

Default Value

Not applicable.

MAC Address

Description

Indicates the MAC address of the SIP-CS that is registered to the Super
Master CS (reference only).

Value Range

Not applicable.

Default Value

Not applicable.

CS Class

Description

Selects the class of the SIP-CS that is registered to the Super Master
CS.

Value Range

•

Master (reference only)

•

2nd Master

•

Slave

Default Value

Not stored.

Status

Description

Indicates the service status of the SIP-CS that is registered to the Super
Master CS (reference only).

Value Range

•

INS

•

- (not available)

Default Value

Not applicable.

Document Version  2013-03  

Administrator Guide

87

2.4.10 Tree Survey

Summary of Contents for KX-UDS124





































































































































































































































































































Reviews:

No comments