manualshive.com logo in svg

Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual, Page: 33 / 416

Share
Download
Panasonic KX-TVS50 - 2 Port Voicemail System Installation Manual Download Page 33

INSTALLATION

Installation Manual

33

2.5

INSTALLATION STEPS

The following is an overview of the standard installation process using Digital Integration. 
When necessary, other sections in this manual have been referenced for more detailed 
descriptions or instructions.

1.

Obtain a list of current users, their extension numbers, their departments, and the type of 
systems they use (mailbox, no mailbox, beeper, car phone, etc.).

2.

Assess your customers' needs before setting up the system. You will save yourself time later 
by giving customers what they need up front. Ask the office manager how the VPS will be 
used. Give examples.
Recommend that your customer use a word processor to log the greetings. You will find 
these files much more easily than the worksheet pages if you need to make changes down 
the road.

3.

Connect the power cord to the VPS.

CAUTION

The power supply cord is used as the main disconnect device. Ensure that the socket-outlet 
is located/installed near the equipment and is easily accessible.

4.

Standard Initialization (For Digital Integration Connection)

a)

Program the ports of the PBX for voice processing (see Section 4 INTEGRATING THE 
VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX).

Program the KX-TA624, the KX-TD1232, the KX-TA1232, the KX-TD816, the KX-
TD308 or KX-TD500 for Voice Mail integration.

•

KX-TA624

•

KX-TD816, KX-TD1232, KX-TA1232, KX-TD308, KX-TD500

Program may be performed on-site or at the office.

All memory is stored and will be retained when the unit is powered up as long as 
the DIP Switch has been reset to position [0] prior to turning the unit off.

b)

Unplug the power cord of the VPS.

c)

Plug station wire(s) from the PBX into VPS (see 2.7

CONNECTIONS).

d)

Connect the computer to the VPS with a Null Modem Cable (see 2.8.2

Connecting the 

RS-232C Cable).

e)

Set the DIP Switch to position 5.

f)

Plug in the power cord of the VPS.

g)

Wait until the "warning" appears on the screen.

h)

Set the DIP Switch back to position 0. 

Summary of Contents for KX-TVS50 - 2 Port Voicemail System

































































































































































































































































































































































































































Reviews:

No comments