Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual

Page: 242 / 416

SYSTEM ADMINISTRATOR'S GUIDE
242 Installation Manual
Beeper
Callback
No. Entry
Mode 1. Caller Select
2. Without
3. Before
4. After
5. Disable
(Disable)
Permits subscribers to use the Callback Number Entry
feature.
Caller
Select: After recording a message, the caller is
asked if the message is urgent. If urgent, the
caller is asked to enter the callback number.
Without: Without recording a message, the caller is
asked to enter the callback number.
Before: Before recording a message, the VPS asks
the caller to enter the callback number.
After: After recording a message, the VPS asks
the caller to enter the callback number.
Disable: Disables the Callback Number Entry
feature.
Note: To utilize this feature, the callback number entry
code must be included in the subscriber's beeper number.
When "Disable" is selected or if the caller does not enter
a callback number, "System Callback No." (see Table
63) will be displayed on the beeper's display. If a caller's
number is received through a telephone company's
Caller ID service, the caller's number will be displayed
instead of "System Callback No.".
MWL
Notification for
Unreceived
Message 1. Yes
2. No
(Yes)
If set to "Yes", the message waiting lamp will illuminate
when unplayed messages remain after the subscriber has
accessed the mailbox for Subscriber Service.
Device
Notification for
Unreceived
Message 1. Yes
2. No
(No)
If set to "Yes", the VPS calls the appropriate device in
numerical order until all unplayed messages are
received.
Authorization
for External
Message
Delivery 1. Yes
2. No
(No)
If set to "Yes", subscribers are able to utilize the External
Message Delivery feature. The sub-parameter to be set is
Prompt Mode. If set to "No", sub-parameter cannot be
assigned.
Table 40
Parameter Value Range
(Default)
Description/Function