Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual, Page: 213 / 416

SYSTEM FEATURES
Installation Manual 213
Message Delivery
Status allows a subscriber to check the status of
messages that have been sent. The sending
subscriber has the option of canceling any of
the messages after checking their status. If a
recorded message has not been received, the
VPS will voice report the following: the
message's destination mailbox number and its
contents.
Message delivery status information is
automatically deleted after the message has
been received by the subscriber, or when the
subscriber cancels the delivery, or when a
new message arrives after 84 delivery status
messages have been stored in the subscriber's
mailbox (the oldest status message is always
deleted first).
• See 3.2 Checking Mailbox
Distribution in the Subscriber's
Guide.
Message Reception
Mode allows incoming calls to be received by either
a subscriber's regular or interview mailbox.
This mode is effective for: (1) Incomplete
Call Handling Service (when the subscriber's
line is busy, or he cannot take the call, or
when he has enabled Call Blocking), and (2)
when the transfer destination of calls is set to
a Logical Extension.
• See "Interview Service" and
"Logical Extension (All Calls
Transfer to Mailbox)" in this
Table.
• See "All Calls Transfer to
Mailbox" in Table 37 in
B2
SYSTEM
ADMINISTRATION—
MAILBOXES.
• See 4.4 Message Reception
Mode in the Subscriber's Guide.
Message Scan permits the subscriber to scan the first 4 s of
each message. The subscriber can replay the
previous message, play the next message, or
play the entire message. • See "Message Scanning with
Information" in Table 40 in
B3
SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Scanning Messages" in
Glossary.
• See 2.1 Receiving Messages in
the Subscriber's Guide.
Table 34
FEATURE DESCRIPTION REFERENCES