manualshive.com logo in svg

Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual, Page: 187 / 416

Share
Download
Panasonic KX-TVS50 - 2 Port Voicemail System Installation Manual Download Page 187

SYSTEM MAINTENANCE AND TROUBLESHOOTING

Installation Manual

187

Note
New MSGs, Received MSGs, and ED MSGs are current status indications. All else are 
accumulated indications since the last clearing of this report.

7.3.10

Mailbox Usage Statistics Clear

The Mailbox Usage Report can be cleared of all values and prepared for use again.

Type [Y] (yes) or [N] (no). If "Y" is entered, the system will clear the data. Wait until "Mailbox 
Usage Report Data Cleared!!" appears on the screen before proceeding.

FROM: The date and time of the last clearing of this report

ED: External Delivery

MN: Message Notification

IM: Interview message

GM: Personal/System Group Distribution List

AF: Auto Forwarding

LD: Long distance call (8 digits or more)

Lcl: Local call (less than 8 digits)

Rcv: Received 

Del: Deleted

Exp: Expired

To clear the Mailbox Usage Report, follow the menu path as shown: 

System Administration Top Menu-2-2-3

 ** Mailbox Usage Report                                                                                                JAN-4-2001 7:46 PM**
MBOX:111 [JONE BLUE]
New                   MSGs         4
Received            
ED                     
FROM : :                                              JAN-3-2001 9:53 AM
Subscriber Access Time

00:00:40

MBOX Use Time                                        00:00:12 of 01:40:00 ( 1% Used)
                                         ED                         MN                     IM                  GM             AF
Feature Usage                   11                           31                      20                    14              22

MSGs         6
MSGs         0

                                         LD                         Lcl                     Beep               Extn.
Outcalling                          6                            13                        0                    28
(Time)                         00:05:10                  00:10:45              00:00:00        00:31:21

                                        Rcv                         Del                    Exp          
MSG Received                 42                           30                      11

System Reports - System Report Clear - Mailbox Usage Statistics Clear

     Enter the Range : =
     May I clear mailbox usage report data ? (Y/N) : =

Summary of Contents for KX-TVS50 - 2 Port Voicemail System

































































































































































































































































































































































































































Reviews:

No comments