Panasonic KX-TVP200BX, Service Manual

Page: 362 / 448

7-4
Maintenance
7.1 Utility Commands
OLD PASSWORD : =
Maximum 8 characters
NEW PASSWORD : =
VERIFICATION : =
$ TIME
Current time is 12:34, PM
Enter new time (HH:MM, AM/PM) : =
Current date is AUG-3-1994
Enter new date (MM–DD–YY) : =
Changing a Password:
2’
Select [1] or [2].
The above is displayed only when changing a password using System
Reset/Clear password.
3’
Enter the current password.
4’
Enter the new password.
5’
Enter the password again for verification.
Notes: • The password you entered does not appear on the screen as a
security measure.
• Pressing [RETURN] instead of entering a password means the
password has been reset.
• The VPS does not distinguish capital letters from small letters.
(The VPS is not case sensitive.)
7.1.4 Set Time (TIME)
Used to set the correct system date and time to ensure accurate scheduling. A
number of functions require that the system time and date be set correctly in order
to operate properly. These include message waiting notification, external message
delivery, call-retries-after initial-failure-to-connect, and automatic deletion of mes-
sages.
1
Type “TIME”, then press [RETURN].
2
Enter the current time.