manualshive.com logo in svg

Panasonic KX-TVP200BX, Service Manual, Page: 205 / 448

Share
Download
Panasonic KX-TVP200BX Service Manual Download Page 205

3-50          Features

P

rivate Message

Feature Ref.

Message Transfer
Message Delivery, Internal

Description

Allows the Subscriber to specify the sending message as private.  Once it is
specified, then the receiving Subscriber cannot transfer it to other mailboxes.

Conditions

• Messages can be specified as private only by the Message Delivery, Internal

feature.

Subscriber

• Message Transfer (Subscriber's Guide page 2-6)
• Delivering Messages to Other Subscribers (Subscriber's Guide page 3-2)

R

eceive Message

Description

All Subscribers, System Manager and Message Manager can listen to the
messages left in their mailboxes.

More
Information

• Reply to Message Sender

After listening to a message, the Subscriber can reply to the sender without
specifying the extension.

• Message Transfer

After listening to a message, the Subscriber can transfer it to other mailboxes.

• Message Scan

Subscribers can listen to the first four seconds of each message.

S.A.

• “Message Retrieval Order” (page 4-28)

S.M.

• “Message Retrieval Order” (page 5-8)
• Listening to Messages (page 5-17)

M.M.

• Listening to Messages (page 6-5)

Subscriber

• Receiving Messages (Subscriber's Guide page 2-2)

PR

3

Features and Services

Summary of Contents for KX-TVP200BX

































































































































































































































































































































































































































































Reviews:

No comments