Panasonic KX-TVP200, Installation Manual, Page: 271 / 408

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 271
Other Parameters-Message Waiting Notification
Controls the handling of message waiting notification calls.
Outgoing Call
Setup
Sequence Up to 12 digits
consisting of
0-9, , #, F, R, S, T,
W
(T)
Specifies the sequence of codes used by the VPS when
calling an outside (CO) line. You can set up to 12
digits. The default value is "T". "T" indicates that the
system will dial the telephone number only after
detecting a dial tone.
Example:
9W = (9) - 1-s wait - dial telephone number. "9" is the
outside (CO) line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
To access the proper menu for Message Waiting Notification Parameter, follow the
menu path as shown:
System Administration Top Menu-1-5-7-3
Table 62
Parameter Value Range
(Default)
Description/Function
Outgoing Call
Ports Port No.
(1-12)
Specifies the port numbers used for the Message Waiting
Notification Device feature. The VPS makes outgoing
calls using the port specified in this parameter. At least 1
port must be specified.
Table 61
Parameter Value Range
(Default)
Description/Function