Panasonic KX-TVP200, Installation Manual

Page: 235 / 408

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 235
Authorization
for Message
Notification 1. Yes
2. No
(Yes)
If set to "Yes", the Message Manager is able to utilise the
Message Waiting Notification feature. The sub-parameters
to be set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Beeper
Callback
No. Entry
Mode 1. Caller
Select
2. Without
3. Before
4. After
5. Disable
(Disable)
Permits the Message Manager to use the Callback Number
Entry feature.
Caller
Select: After recording a message, the caller is asked
if the message is urgent. If urgent, the caller is
asked to enter the callback number.
Without: Without recording a message, the caller is
asked to enter the callback number.
Before: Before recording a message, the VPS asks the
caller to enter the callback number.
After: After recording a message, the VPS asks the
caller to enter the callback number.
Disable: Disables the Callback Number Entry feature.
Note: To utilise this feature, the callback number entry code
must be included in the subscriber's beeper number. When
"Disable" is selected or if the caller does not enter a callback
number, "System Callback No." (see Table 62) will be
displayed on the beeper's display. If a caller's number is
received through a telephone company's Caller ID service,
the caller's number will be displayed instead of "System
Callback No.".
MWL
Notification for
Unreceived
Message 1. Yes
2. No
(Yes)
If set to "Yes", the message waiting lamp illuminates when
unplayed messages remain after the Message Manager has
accessed the mailbox.
Device
Notification for
Unreceived
Message 1. Yes
2. No
(No)
If set to "Yes", the VPS calls the appropriate device in
numerical order until all unplayed messages are received.
Table 40
Parameter Value Range
(Default)
Description/Function