Panasonic KX-TVP200, Installation Manual

Page: 229 / 408

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 229
Intercom
Paging Group 1-17
(Group 1)
Specifies the Intercom Paging group number available to
the subscriber.
If set to "17", the Intercom Paging feature is activated for
all groups.
Note: The Intercom Paging feature is available if DPT
Voice Mail Integration is activated with a Panasonic KX-
TD series telephone system.
Prompt Mode 1. System
2. User 1
3. User 2
(System)
Specifies the language used for voice prompts played for
the subscriber during a Message Waiting Notification
Call and Subscriber Service.
Note: If User 2 is specified as Prompt Mode but not
recorded by the Message Manager, the VPS will
automatically play the factory-recorded System prompts
in English. By default, User 2 prompts are recorded in
Portuguese.
Remote Call
Forward to CO 1. Yes
2. No
(No)
If set to "Yes", Remote Call Forwarding can be set to an
outside (CO) line; a subscriber can program his
extension from a remote location to forward various
types of calls to either "Telephone No.1" or "Telephone
No.2" (preprogrammed in the Mailbox Setting), or to any
other telephone number.
Note: The Remote Call FWD to CO feature is available
if DPT Voice Mail Integration is activated with a
Panasonic KX-TD series telephone system.
Important Note: With respect to PBX programming, it
is possible that "Call Forward to CO" is disabled. To
enable VPS Remote Call Forwarding, the KX-TD1232,
for example, must be programmed properly. For the COS
of the extensions whose calls are to be forwarded to an
outside (CO) line, enable the following: [504] Call
Forward to Outside Line.
Delete
Message
Confirmation 1. Yes
2. No
(No)
If set to "Yes", the VPS requests confirmation from the
mailbox owner before erasing a message left in the
mailbox. If set to "No", the message is erased
immediately.
Table 39
Parameter Value Range
(Default)
Description/Function