Panasonic KX-TVM50, Programming Manual

Page: 83 / 200

2.4 Service Settings
Programming Guide 83
Note
• All non-touch input calls in Automated Attendant Service will be transferred to the General
Delivery Mailbox when the Operator Service is disabled.
Operator Service For Day, Night, Lunch, and Break
Specifies Operator 1, 2, and 3's extension and the treatment of the calls transferred to that extension
in Day, Night, Lunch, and Break Modes. The extension number assigned for Operator Service For
Day in Operator Service No. 1 will be for the Message Manager. When the Operator Service is
enabled, operator-seeking calls first reach Operator 1's extension. To specify the parameters,
enables the Operator Service For Day, Night, Lunch, and Break (checked).
Note
• Because the extension number assigned for Operator Service No. 1 in the Day Mode is for
the Message Manager, you cannot assign this extension to any other mailbox.
• Extensions assigned as operators can be called by dialling [0], however, when setting
features such as Message Waiting Notification and Remote Call Forwarding, the extension
number (not "0") must be specified.
Value Range
Disable (unchecked), Enable (checked)
Feature Guide References
2.3.34 Operator Service
Operator Service No. 1, 2, and 3
Operator's Extension
Specifies the extension number for Operator 1, 2, and 3.
Note
• Extensions assigned as operators can be called by dialling [0], however, when setting
features such as Message Waiting Notification and Remote Call Forwarding, the extension
number (not "0") must be specified.
• The extension number must not be assigned anywhere else (in particular, the extension
must not have a mailbox). Otherwise, you will get an error message.
Value Range
2–5 digits
Feature Guide References
2.3.34 Operator Service