2.3 Port/Trunk Service
74
Programming Guide
Delayed Answer Time
Specifies whether the port or trunk answers immediately (0) or with delay (1 s – 60 s).
Value Range
0 s–60 s
Time Frame
Specifies the "Start" and "End" times of Day Service, Night Service, Lunch Service, and Break
Service for the day of each week. 3 ranges are available for Break Service Mode.
Follow the steps below to edit Time Frame:
1.
Click Click to Edit….
2.
Select a time mode, then enter the start and end times in the "Start At:" and "End At:" fields or
drag the edges of the time mode to mark the start and end times.
To copy and paste a Service Mode
1.
Select any time mode of the day you want to copy, and click Copy.
2.
Select any time mode of the day you want to edit, then click Paste.
To add a time mode
1.
Select the time mode that is nearest to the start time of the time mode you want to add, then
right-click.
2.
Right Click the Service Mode frame, click Insert Interval and select the Service Mode
(Night, Day, Lunch, and Break).
3.
Click OK.
Note
•
This setting is only available when "Automatic" is selected in "Service Mode".
Value Range
Hour: 00–24
Minute: 00–59
Feature Guide References
Caller ID/DID Call Routing
Enables or disables the Caller ID/DID Call Routing feature.
Value Range
Disable, Enable
Feature Guide References
Summary of Contents for KX-TVM50
