Panasonic KX-TVM50 Programming Manual Download Page 57

Page: 57 / 200

2.1 Mailbox Settings

Programming Guide

2.1.11 E-mail Option

Enables subscribers to receive Message Waiting Notifications by e-mail when they receive new
messages.

Username

Specifies a subscriber's user name for e-mail option. Any ASCII Character can be used.

Value Range

Max. 64 characters

Feature Guide References

2.2.1 E-mail Integration

E-mail Address

Specifies the subscriber's e-mail address. Any ASCII character can be used.

Value Range

Max. 128 characters

Feature Guide References

2.2.1 E-mail Integration

Send E-mail with New Messages

If set to "Enable", the subscriber is able to receive notification by e-mail.

Value Range

Disable, Enable

Feature Guide References

2.2.1 E-mail Integration

Attach Voice File

If set to "Enable", the subscriber is able to receive messages by e-mail (messages are sent as file
attachments).

Value Range

Disable, Enable

Summary of Contents for KX-TVM50









































































































































































































Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands

Panasonic KX-TVM50, Programming Manual

Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands