2.8 System Security
176
Programming Guide
•
The System Manager's password has not been set previously.
•
The password must be entered 2 times for verification.
Value Range
Disable, Enable
Feature Guide References
Password for System Manager
If "Enable" is selected in "System Manager Access from Telephone", assign here a password for the
System Manager to login the VPS. A combination of numbers can be used.
Follow the steps below to change the password:
1.
Click Click to change password….
2.
Enter a new password in Enter new password:.
3.
Enter the new password in Confirm new password:.
4.
Click OK.
Value Range
Max. 16 digits
Feature Guide References
Message Manager Access from Telephone
Enables/disables access to the VPS from the Message Manager's telephone.
Note
•
The System Administrator will be asked to set the Message Manager's password if both of
the following conditions are met:
a)
The System Administrator changes this parameter from "Disable" to "Enable".
b)
The Message Manager's password has not been set previously.
•
The password must be entered twice for verification.
Value Range
Disable, Enable
Feature Guide References
Summary of Contents for KX-TVM50
