Panasonic KX-TVM50 Programming Manual Download Page 139

Page: 139 / 200

2.5 System Parameters

Programming Guide

139

Feature Guide References

2.2.1 E-mail Integration

Maximum Message Length

Specifies the maximum length of voice messages sent as e-mail attachment.

Value Range

1 min–60 min, Unlimited

Feature Guide References

2.2.1 E-mail Integration

Advanced Settings

SMTP Server Port

Specifies the port number for the outgoing mail server.

Value Range

1-65535

POP Server Port

Specifies the port number for the incoming mail server.

Value Range

1-65535

POP Before SMTP

If set to "Enable", POP Before SMTP authentication is used for outgoing mail server. For
authentication, username and password are required.

Value Range

Disable, Enable

POP Before SMTP Username

Specifies the user name for POP Before SMTP authentication. Any ASCII Character can be used.

Value Range

Max. 64 characters

Summary of Contents for KX-TVM50









































































































































































































Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands

Panasonic KX-TVM50, Programming Manual

Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands