Panasonic KX-TVM50 Programming Manual Download Page 138

Page: 138 / 200

2.5 System Parameters

138

Programming Guide

Feature Guide References

E-mail Integration

E-mail Integration allows the VPS to send new message notification or to send recorded voice
messages as file attachments to subscribers via e-mail.

E-mail Integration

If set to "Enable", subscribers are able to utilise E-mail Integration features.

Value Range

Disable, Enable

Feature Guide References

2.2.1 E-mail Integration

Mail Address

Specifies the mail address of VPS. Any ASCII Character can be used.

Value Range

Max. 128 characters

Feature Guide References

2.2.1 E-mail Integration

Full Name

Specifies the full name of VPS for the E-mail Integration. Any ASCII Character can be used.

Value Range

Max. 64 characters

Feature Guide References

2.2.1 E-mail Integration

SMTP Server Address

Specifies the IP address of the outgoing mail server used by the VPS.

Value Range

XXX.XXX.XXX.XXX (X=0–9)

Summary of Contents for KX-TVM50









































































































































































































Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands

Panasonic KX-TVM50, Programming Manual

Search results

Summary of Contents for KX-TVM50

Reviews:

Related manuals for KX-TVM50

Brands by name

Popular brands