6 DPT Feature
Programming for
KX-TDE and KX-TDA
Series PBXs
The following VPS features are functional
on any KX-T7xxx proprietary telephone that
is connected to the PBX.
Programming procedures and
availability may vary by country/area,
software version, etc. For more
information, consult your System
Administrator.
6.1 Programming Your
Extension for LCS
Live Call Screening Button
Assignment
Follow the procedure below to assign an
LCS button on your extension.
1.
Enter Personal Programming:
While on-hook, press the
PROGRAM
button.
(Display changes to PT-PGM Mode.)
2.
Press the Flexible (CO or DSS/BLF)
button you want to assign as the LCS
button.
3.
Enter
[92]
.
Screen output:
LCS
4.
Press the
STORE
button.
5.
Press the
PROGRAM
button or lift the
handset to exit the Personal
Programming mode.
Live Call Screening Password
Assignment
To allow the Live Call Screening feature to
work at an extension, the extension must
have the LCS button lit. To light this button,
press the LCS button, then enter the
password. This password prevents others
from activating the LCS feature and
listening to your messages as they are
being left.
Note
•
For KX-TDE and KX-TDA series
PBXs, the term "Live Call Screening
Password" used in this section
indicates the Extension PIN
(Personal Identification Number).
1.
Lift the handset or press the
SP-PHONE
button.
2.
Enter
[ 799]
.
3.
Enter
[1]
.
Screen output:
Enter PIN
4.
Enter a password (max. 10 digits), then
press [#].
Screen output:
Enter PIN Again
5. Re-enter
the password, then press [#].
You will hear a confirmation tone, then a
dial tone.
Screen output:
PIN set
6.
Hang up or press the
SP-PHONE
button.
Live Call Screening Password
Cancelling
To cancel the LCS password, follow the
procedure below.
Note
•
For KX-TDE and KX-TDA series
PBXs, the term "Live Call Screening
Password" used in this section
indicates the Extension PIN
(Personal Identification Number).
1.
Lift the handset or press the
SP-PHONE
button.
2.
Enter
[ 799]
.
3.
Enter
[0]
.
Screen output:
Enter PIN
4.
Enter the extension’s password.
You will hear a confirmation tone, then a
dial tone.
Screen output:
PIN cleared
5.
Hang up or press the
SP-PHONE
button.
Document Version 3.0 2010/07
Subscriber’s Manual
55
6.1 Programming Your Extension for LCS
