Panasonic KX-TVA200, Installation Manual

Page: 86 / 208

3.3 Starting KX-TVA Maintenance Console
86 Installation Manual
3.3 Starting KX-TVA Maintenance Console
The instructions listed below explain how to start KX-TVA Maintenance Console. These instructions
are for when connecting to the VPS via USB.
Note
• The screenshots shown here are for reference only, and may differ from the screens
displayed on your PC.
1. Click the KX-TVA Maintenance Console shortcut
icon. Its icon is shown here, on the left.
2. Select the appropriate VPS model.
3. The Enter Programmer Code dialog box is
displayed. Enter the programmer code (default:
1234) and click
OK .
Note
• The programmer code is required to use
the KX-TVA Maintenance Console. The
System Administrator can change the
programmer code (see 1.8.9 Utility—
Programmer Code in the Programming
Manual).
4. The Set Default Parameters window is displayed the
first you start KX-TVA Maintenance Console. Select
the TVA Type, PBX Type, and Integration Mode.
Change the default parameters listed in the window
if necessary, then click
OK .