Panasonic KX-TVA200, Installation Manual

Page: 187 / 208

7.3 Restarting the VPS
Installation Manual 187
7.3 Restarting the VPS
If the VPS is not functioning properly, restarting the VPS may resolve the issue. There are 3 methods
for restarting the VPS, explained below.
Operation
1.
If the VPS does not operate properly:
a.
First, try to click "Utility System Initialize/Restart Restart System" .
b.
Select "OK" to close all lines and restart the VPS.
c.
Press "OK" and wait for the VPS to restart.
2.
If the VPS still does not operate properly:
a.
Press the Shutdown button. The RUN Indicator will begin flashing.
b.
Wait for the RUN Indicator to turn off and for the ALARM Indicator to light.
c.
Press the Reset button.
• Pressing the Reset button before the Alarm Indicator lights may cause the VPS to
take an exceptionally long time (up to 10 minutes) to start up again.