Panasonic KX-TPA73, Operating Instructions Manual

Page: 117 / 161

9.4 Registering/Deregistering a Handset/Desk Phone to the
Panasonic base unit
9.4.1 Registering a Handset/Desk Phone to the Panasonic base unit
You can register a handset/desk phone to up to 4 base units.
You can register a base unit to up to 16 handsets/desk phones (KX-TPA70/
KX-TPA73/KX-TPA60/KX-TPA65/KX-TPA68/KX-UDT series).
There are 2 types of registration method.
• Handset/desk phone registration using the base unit
• Handset/desk phone registration using the handset/desk phone
The supplied handset/desk phone and base unit are preregistered. If for some reason
the handset/desk phone is not registered to the base unit (for example, the signal
strength is out of range even when the handset/desk phone is near the base unit), re-
register the handset/desk phone.
Handset/desk phone registration using the base unit
When adding a new handset/desk phone:
1. Base unit:
a. Press and hold the handset locator button for about 3 seconds.
The STATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
[When adding a new handset/desk phone]
• Easy registration
In standby mode, press and hold until displaying "Please Wait…".
After "Registered Successfully" displayed on the LCD, the registration is
completed.
From step a to step d can be skipped.
[When registering a handset/desk phone to another base unit]
• Normal registration
[In standby mode]
a. /[CENTER]
b. [ ]/[ ]: "Phone Settings" /[CENTER]
c. [ ]/[ ]: "System Option" *1 /[CENTER]/[ ]
d. [ ]/[ ]: "Register H/S" /[CENTER]/[ ]
e. Select a base unit. /[CENTER]
After "Registered Successfully" is displayed on the LCD, the registration is
completed.
9.4 Registering/Deregistering a Handset/Desk Phone to the Panasonic base unit
117