manualshive.com logo in svg

Panasonic KX-TGP700, Administrator'S Manual, Page: 100 / 399

Share
Download
Panasonic KX-TGP700 Administrator'S Manual Download Page 100

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

DST_ENABLE

DST Offset (Summer Time Offset)

Description

Specifies the amount of time, in minutes, to change the time when
"DST_ENABLE" is set to "Y".

Value Range

0–720 (min)

Default Value

60

Configuration File Reference

DST_OFFSET

3.4.5.4  Start Day and Time of DST (Start Day and Time of Summer
Time)

Month

Description

Selects the month in which DST (Summer Time) starts.

Value Range

•

January

•

February

•

March

•

April

•

May

•

June

•

July

•

August

•

September

•

October

•

November

•

December

Default Value

March

Configuration File Reference

DST_START_MONTH

Day of Week

Using the 2 following settings, specify on which day of the selected month DST (Summer Time) starts. For
example, to specify the second Sunday, select 

[Second]

 and 

[Sunday]

.

Description

Selects the number of the week on which DST (Summer Time) starts.

3.4.5 Time Adjust Settings

100

Administrator Guide

Document Version: 2020-04

Summary of Contents for KX-TGP700
















































































































































































































































































































































































































Reviews:

No comments