Panasonic KX-TGP500, Administrator'S Manual

Page: 109 / 284

Inter-digit Timeout
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 3–10
Default Value 5
Configuration File Reference INTDIGIT_TIM (Page 179)
3.7.2.2 Emergency Call Phone Numbers
1–5
Description Specifies the phone numbers used for making emergency calls. A user
can dial any of the specified phone numbers at any time regardless of
any restrictions imposed on the unit. A maximum of 5 phone numbers
can be specified.
Note
•
When a phone number is specified here, it will be prioritized
over the setting specified in
[Dial Plan] in 3.7.3.2 Dial Plan .
Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference EMERGENCY_CALL[1–5] (Page 178)
3.7.2.3 Call Rejection Phone Numbers
1–30
Description Specifies the phone numbers to reject incoming calls from. A maximum
of 30 phone numbers can be specified.
Note
•
You can also configure this setting through the phone user
interface. If these settings are changed through the phone user
interface while being changed through the Web user interface,
the settings made through the phone user interface will be
overwritten by the settings made through the Web user
interface.
Value Range Max. 24 characters
Note
•
Even if you specify nonconsecutive fields (e.g., fields 1, 5, and
30), they will be rearranged into consecutive fields after you
save the settings (i.e., 1, 2, and 3).
Default Value Not stored.
Document Version 2013-02 Administrator Guide 109
3.7.2 Call Control