Panasonic KX-TGM420 Operating Instructions Manual Download Page 160

Page: 160 / 207

160 |

P a g e

Turn this feature off when:

– You do not subscribe to voicemail service.
– Your phone service provider does not send

voicemail tones.

– Your phone is connected to a PBX.

If you are not sure which setting is required, contact
your phone service provider.

Turning VM tone detection on/off

The default setting is “On”.

[MENU] [#] [3] [3] [2]

[ ]: Select the desired setting.



[SAVE]



[OFF]

Listening to voicemail messages

When new messages have been recorded:

– “Voicemail msg. via phone co.” is displayed if

message indication service is available.

– The message indicator flashes slowly if the handset

or base unit message indicator’s “New VM” setting
is enabled (page 61).

Summary of Contents for KX-TGM420
















































































































































































































Search results

Summary of Contents for KX-TGM420

Reviews:

Panasonic KX-TGM420, Operating Instructions Manual, Page: 160 / 207

Search results

Summary of Contents for KX-TGM420

Reviews: