MbN
: Select the category.
a
Press
M
SELECT
N
again. “ ” disappears.
3
M
OK
N
a
M
OFF
N
Nuisance call block
This feature blocks calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (50 max.).
–
“
Single Number
”
: The unit blocks calls
from specific phone numbers.
–
“
Range of Numbers
”
: The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
You can also set the unit to block calls that
have no phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller’s phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R
Blocked calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R
You must include the area code when
storing phone numbers in the call block list.
n
From the caller list:
1
MCN
CID
2
MbN
: Select the entry to be blocked.
a
M
MENU
N
3
MbN
:
“
Save Call Block
”
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
OFF
N
n
By entering phone numbers:
1
M
MENU
N#217
2
MbN
:
“
Single Number
”
a
M
OK
N
3
M
MENU
N
a
MbN
:
“
Add
”
a
M
OK
N
4
Enter the phone number (24 digits max.).
R
To erase a digit, press
M
CLEAR
N
.
5
M
OK
N
a
M
OFF
N
Storing a range of numbers
1
M
MENU
N#217
2
MbN
:
“
Range of Numbers
”
a
M
OK
N
3
M
MENU
N
a
MbN
:
“
Add
”
a
M
OK
N
4
Enter the desired number (2-8 digits).
R
To erase a digit, press
M
CLEAR
N
.
5
M
OK
N
a
M
OFF
N
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers.
1
M
MENU
N#240
2
MbN
: Select the desired setting.
a
M
OK
N
3
M
OFF
N
Viewing/editing/erasing call
block numbers
1
M
MENU
N#217
2
MbN
:
“
Single Number
”
or
“
Range of
Numbers
”
a
M
OK
N
3
MbN
: Select the desired entry.
R
To exit, press
M
OFF
N
.
4
To edit a number:
M
EDIT
N
a
Edit the number.
a
M
OK
N
a
M
OFF
N
To erase a number:
M
ERASE
N
a
MbN
:
“
Yes
”
a
M
OK
N
a
M
OFF
N
Note:
R
When editing, press the desired dial key to
add digits and press
M
CLEAR
N
to erase
digits.
Erasing all call block numbers
1
M
MENU
N#217
2
MbN
:
“
Single Number
”
or
“
Range of
Numbers
”
a
M
OK
N
28
Programming
KX-TGK320AZ_(en-en)_0908_ver001.pdf 28
9/8/2015 11:08:27 AM
